DieselFind Mobile diesel mechanics
Mobile and shop · Williston, North Dakota

CTT Repair

5510 Sunrise Drive, Williston, ND 58801-9373. Confirm by phone before driving over.

Mobile and shopRuns a shop and also sends a service truck out. Bigger jobs may still mean a tow to their bay.What do these terms mean? Heavy equipmentWorks on construction and heavy equipment: excavators, dozers, loaders, skid steers, backhoes, graders, cranes.What do these terms mean? Takes after-hours callsThe business's own site mentions 24/7, emergency or after-hours service. Rates for those calls are often higher.What do these terms mean?
Own CTT Repair? Update this listing

CTT Repair is a crane shop based in Williston, North Dakota, at 5510 Sunrise Drive, behind MCE. The company was founded in 1993, when it started servicing coach motorhomes out of a small garage in Ohio, and it moved into heavy equipment later. Today its main trade is crane work: inspection, repair, sales, rental and recovery.

For mobile cranes, it services and repairs "all makes and models of mobile cranes," covering engine and hydraulic failures, structural damage, electrical problems and crane recovery. For overhead cranes, it does certified inspections and repairs on bridge, gantry, jib and monorail cranes. Its hydraulic hose work covers cranes, bucket trucks, crawlers, backhoes, tractors, dump units, plows and other hydraulic equipment. For field calls, it comes to your jobsite. Its technicians bring "a vehicle stocked with hoses, fittings and the tools needed to diagnose your failure," and the company runs multiple service trucks. It stocks over 745 fittings, from suction hose to high pressure hose, and will make and install a new hose assembly on site. Hose work can also be done at the shop.

It does not publish a service call fee or an hourly rate, and no shop hours are posted. Its hose technicians are "on-call 24/7," and its in-house commercial pilots are available to expedite crane repair "regionally and to remote areas," but no radius is given. Ask about the service call fee, the shop hours, how far it will drive, and whether a crane repair is done at your site or at the shop before you book.

It is an authorized, certified Parker Store Hose Doctor, and its hose work runs through the wider Parker network, which the company describes as "more than 3600 service points in 90 countries." That matters when a hose fails on a crane or backhoe, because a technician who brings the parts and tools to the machine saves a tow to a shop and the wait that comes with it. Google rates it 4.5 stars from 2 reviews.

This is a good fit for a crane or backhoe owner in Williston or the region who needs a hydraulic hose replaced where the machine sits, or a crane inspected, repaired or recovered.

Based inWilliston, North Dakota5510 Sunrise Drive, Williston, ND 58801-9373
Service area“In-house commercial pilots available to expedite crane repair regionally and to remote areas.”cttrepair.com
Service call fee and hourly rateNot published. Ask on the phone what the service call fee is and whether it includes the first hour.
HoursNot published
Works onEngines and diagnosticsEngines and diagnosticsEngine trouble and finding the fault: check-engine lights and fault codes, no-starts, low power, smoke, injectors, turbos, head gaskets, overhauls and in-frame rebuilds.Electrical and startingElectrical and startingBatteries, starters and alternators, wiring and harnesses, lights, ABS faults, and the electrical problems that leave a rig dead or throwing codes.Hydraulics and PTOHydraulics and PTOHydraulic systems on dump trucks and equipment: hoses and fittings, cylinders, pumps and motors, valves, wet kits and PTO-driven hydraulics.Preventive maintenance and oil changesPreventive maintenance and oil changesRoutine upkeep that heads off breakdowns: oil and filter changes, greasing, fluid services, scheduled PM services, and DOT or annual inspections.Towing and recoveryTowing and recoveryTowing and recovery: hauling a truck or machine that cannot be fixed where it sits, winch-outs and heavy-duty recovery.Listed at cttrepair.com. This is what they list, not a limit; ask about anything else.
Vehicle typesSemi trucks and tractorsMedium-duty and vocational trucksConstruction and heavy equipmentNamed on cttrepair.com
CertificationsNone named
Listed as“Mechanical Failures; hydraulic system; Electrical Problems; Structural Damage; Mobile Hydraulic Hose Replacement; system troubleshooting; preventive maintenance and diagnostics; fluid sampling; Suction Hose to High Pressure Hose; -4 to -32 Hose Fittings; crane recovery; crane inspections”
Time in business“Established 1993”
Google rating4.5 of 5, 2 reviewsGoogle Maps listing, read November 12, 2026

Others in Williston

If this one is not your mechanic, these are the rest of the 19 listed here.

Daryl's Mobile Tire Service

Tire serviceCommercial tire service: roadside tire changes, mounting, balancing, new and retread tires.What do these terms mean? Takes after-hours callsThe business's own site mentions 24/7, emergency or after-hours service. Rates for those calls are often higher.What do these terms mean?
Based in Williston. Service area, in their words: “Request our mobile fleet tire service in Williston, ND, Bainville, MT, Bakken, ND and many surrounding areas. We have a wide service area to…”
5.0 on Google, 85 reviews (listing, November 12, 2026)
No published rates. What is known is on its page.

C&M Heavy Duty Repair

Truck repair shopA fixed location. You bring the truck to them; no service call fee, but getting it there is on you.What do these terms mean? CertifiedThe business names a certifying body on its own site. The pill shows which one; the listing page links to the exact wording.What do these terms mean?
Based in Williston. Service area, in their words: “Fairview, MT; McKenzie, ND; Plentywood, MT; Sheridan County, MT; Sidney, MT; Williston, ND”
5.0 on Google, 5 reviews (listing, November 12, 2026)

C&M Heavy Duty Repair is a truck repair shop based at 4319 16th Ave W in Center Bay, Williston, ND.

Mondak Equipment

Mobile and shopRuns a shop and also sends a service truck out. Bigger jobs may still mean a tow to their bay.What do these terms mean? Heavy equipmentWorks on construction and heavy equipment: excavators, dozers, loaders, skid steers, backhoes, graders, cranes.What do these terms mean?Farm equipmentWorks on farm machines: tractors, combines, sprayers, balers, planters, swathers and irrigation engines.What do these terms mean? Takes after-hours callsThe business's own site mentions 24/7, emergency or after-hours service. Rates for those calls are often higher.What do these terms mean?
Based in Williston. Service area, in their words: “Mondak has two shops: Williston and Glendive. A resident technician serves Dickinson, and mobile coverage reaches working equipment across w…”
5.0 on Google, 5 reviews (listing, November 12, 2026)

Mondak Equipment is a heavy equipment and commercial truck repair business based in Williston, North Dakota, with a second shop in Glendive, Montana.

See all 19 in Williston